Vestibuloplastia con láser de Er Cr:YSGG y nanotransportador biomolécula EPX: un nuevo cicatrizante periodontal / Vestibuloplasty with Er Cr:YSGG laser and EPX biomolecule nanocarrier: a new periodontal healing agent

La resorción ósea alveolar suele dar lugar a que las inserciones de la mucosa interfieran para la construcción, estabilidad y retención de una prótesis removible, una opción que permite modificar este tejido se obtiene por medio de una vestibuloplastia. Actualmente se puede favorecer la cicatrización de heridas utilizando láser de alta potencia aplicado a procedimientos quirúrgicos orales. Se realiza reporte de caso en paciente femenino a la que se realizó procedimiento de vestibuloplastia con láser de Er,Cr:YSGG, utilizando de forma postoperatoria gel de quitosano en nanotransportador biomolécula EPX. Se observa una cicatrización rápida y favorable al combinar ambas terapéuticas, además al utilizar productos con quitosano se disminuye el riesgo de la necrosis de fibroblastos gingivales humanos como recientemente se reportó en el uso de colutorios de clorhexidina (AU)

Alveolar bone resorption often results in mucosal insertions interfering with the construction, stability and retention of a removable prosthesis, an option to modify this tissue is obtained by means of vestibuloplasty. Currently, wound healing can be promoted by using high power laser applied to oral surgical procedures. A case report of a female patient who underwent a vestibuloplasty procedure with laser Er,Cr:YSGG, using chitosan gel with EPX biomolecule nanocarriers postoperatively. A fast and favorable healing is observed when combining both therapeutics, besides, when using products with chitosan, the risk of necrosis of human gingival fibroblasts is reduced, as recently reported in the use of chlorhexidine mouthwashes (AU)

Histological artifacts associated with laser and electroscalpel gingivectomy: Case series / Artefactos histológicos asociados a gingivectomía con láser y electrobisturí: serie de casos

Introduction. Over time, efforts have been invested in the design of new instruments that overcome the disadvantages of the gold standard instrument in surgery, the scalpel. As a result, electronic equipment has emerged such as the electric scalpel and laser devices. The available evidence on these instruments suggests that the tissue response is related to each instrument's physical and biological cutting principles. Objective. To compare the histological changes in gingiva samples associated with surgical cutting performed with a 940 nm diode laser, a 2780 nm erbium, chromium: yttriumscandium-gallium-garnet (Er,Cr:YSGG) laser, and an electric scalpel, by presenting a series of cases. Case presentation. We present three cases of healthy patients undergoing cosmetic surgery. The clinical examination revealed exposure of a keratinized gingiva band greater than 4 mm, normal color and texture in gingival tissue, with a firm consistency and no bleeding on periodontal probing. Gingivectomy was indicated with the following protocols: Diode laser of 940 nm at 1 W, in continuous mode; Er,Cr:YSGG laser of 2780 nm at 2.5 W, 75 Hz, H mode, air 20, water 40, gold tip MT4); and electric scalpel in cutting mode at power level four. Gingival tissue samples were taken and stored in 10% formaldehyde for histological analysis. Conclusion. All the evaluated cutting instruments generated histological changes produced by the thermal effect, the main ones being collagen coagulation and carbonization. The depth of thermal damage caused by the 2780 nm Er,Cr:YSGG laser was much lesser than that induced by the electric scalpel and the 940 nm diode laser.

Introducción. Históricamente se ha invertido esfuerzo en el diseño de nuevos instrumentos que superen las desventajas del estándar de referencia en cirugía, el bisturí. Como consecuencia de esto, han surgido equipos electrónicos como el electrobisturí y los diferentes dispositivos de tecnología láser. La información disponible sobre estos instrumentos sugiere que la respuesta del tejido intervenido está influenciada por los principios físicos y biológicos de corte del instrumento. Objetivo. Comparar los cambios histológicos en muestras de encía asociados al corte quirúrgico realizado con láser de diodo de 940 nm, láser de erbio, cromo: itrio-escandio-galio-granate (Er,Cr:YSGG) (2780nm) y electrobisturí mediante una presentación de serie de casos. Presentación de los casos. Se presentan tres casos de pacientes sanos sometidos a cirugía estética. El examen clínico reveló la exposición de una banda gingival queratinizada mayor de 4 mm, tejido gingival de color y textura normales, de consistencia firme y sin sangrado al sondaje periodontal. Se indicó gingivectomía con los siguientes protocolos: láser de diodo de 940 nm a 1 W, en modo continuo; láser de Er,Cr:YSGG de 2780 nm a 2,5 W, 75 Hz, modo H, aire 20, agua 40, punta de oro MT4; y bisturí eléctrico en modo de corte, a nivel de potencia cuatro. Se tomaron muestras de tejido gingival y se almacenaron en formaldehído al 10 % para su análisis histológico. Conclusión. Los tres instrumentos de corte generaron cambios histológicos producidos por el efecto térmico; los principales fueron coagulación del colágeno y carbonización. La profundización del daño térmico causada por el láser de Er,Cr:YSGG de 2780 nm fue mucho menor que la generada por el electrobisturí y por el láser de diodo de 940 nm.

Better timing for HoLEP: a retrospective analysis of patients treated with HoLEP over a 10-year period with a 1-year follow-up / 亚洲男科学杂志(英文版)

The aim of this study was to explore the optimal timing of holmium laser enucleation of the prostate (HoLEP) in patients presenting benign prostatic hyperplasia (BPH) with lower urinary tract symptoms (LUTS). A retrospective analysis was conducted based on the perioperative and postoperative outcome data of 1212 patients who underwent HoLEP in Shanghai Ninth People's Hospital (Shanghai, China) between January 2009 and December 2018. According to the preoperative International Prostate Symptom Score (IPSS), all patients whom we analyzed were divided into Group A (IPSS of 8-18) and Group B (IPSS of 19-35). Peri- and postoperative outcome data were obtained during the 1-year follow-up. IPSS changes were the main postoperative outcomes. The postoperative IPSS, quality of life, peak urinary flow rate, postvoid residual, and overactive bladder symptom score (OABSS) improved significantly. The IPSS improved further in the group with severe LUTS symptoms, but the postoperative IPSS was still higher than that in the moderate LUTS group. OABSSs showing moderate and severe cases after follow-up were more frequent in Group B (9.1%) than in Group A (5.2%) (P < 0.05). There were no significant intergroup differences in the intraoperative American Society of Anesthesiologists or hospitalization expense scores, and the medication costs, as well as the total costs, were significantly higher in Group B. In this retrospective study, HoLEP was an effective treatment for symptomatic BPH. For patients with LUTS, earlier surgery in patients with moderate severity may result in a marginally better 12-month IPSS than that in men with severe symptoms.

Bond strength of bulk fill composite to teeth prepared with Er: YAG laser

Aim: The present in vitro study aimed to evaluate the bond strength of a bulk fill composite on dentin surfaces prepared with the Er: YAG laser. Methods: Twenty-four permanent third molars were selected and divided into 2 groups: CP - Conventional preparation with high-speed handpiece (control) and LA (laser) - Preparation with Er: YAG laser. The occlusal surface was removed to expose coronal dentin, which was subsequently prepared with a high-speed handpiece or Er: YAG laser (350mJ, 4Hz, 1.5 ml/min water flow). Both groups were restored with Filtek One Bulk Fill (3M ESPE) composite resin. After 24 hours, the samples were evaluated for microtensile bond strength (µTBS), fracture pattern, and scanning electron microscopy (SEM). Results: The data obtained in the µTBS test were submitted to t-test (α=0.05). The results showed no difference in µTBS when the different types of cavity preparation were compared (ρ=0.091). Fracture patterns revealed the prevalence of cohesive fracture in composite resin in CP (83.3%) and adhesive fracture in LA (92.1%). In the SEM analysis, the LA group demonstrated the presence of gaps between the composite resin and the irradiated dentin surface. The hybrid layer exhibited more regularity with the presence of longer and uniform resin tags in the CP group. Conclusion: The type of cavity preparation did not influence the values of bulk fill composite resin µTBS to dentin. Fracture patterns and scanning electron microscopy analyses suggested less interference at the adhesive interface in preparations performed using CP

Response of dental pulp capped with calcium-silicate based material, calcium hydroxide and adhesive resin in rabbit teeth

Direct pulp capping induces a local inflammatory process. Several biomaterials have been used for this procedure. The aim of this study was to compare the dentinal bridge thickness using three different pulp capping biomaterials with the conventional technique (high speed diamond bur) or Er-Yag laser, 1 month after pulp effraction. Materials and Methods: Forty two Class V cavities were prepared on the buccal surface of 4 maxillary incisors and 2 mandibular incisors of New Zealand rabbits. Specimens were divided into 6 treatment groups. Teeth were treated with: In Group 1: Er-Yag laser and Biodentine® (Septodont), in Group 2: Er: Yag laser and calcium hydroxide (Dycal® Dentsply), in Group 3: Er: Yag laser and adhesive system (Prime& Bond® NT Dentsply), in Group 4: high speed diamond bur and Biodentine® (Septodont), in Group 5: high speed diamond bur and calcium hydroxide (Dycal® Dentsply), and in Group 6: high speed diamond bur and adhesive system (Prime& Bond® NT Dentsply). The preparation was done with copious irrigation. The animals were sacrificed at 30 days and the teeth were extracted and prepared for histological analysis. Results: In the group of « laser Er-Yag ¼, iatrogenic pulpal wounds treated with Biodentine® were covered with a thick hard tissue barrier after 1 month. The difference was not significant with the groups of Dycal® used with Er: Yag laser and high speed diamond bur. Prime& Bond® NT Dentsply specimens showed a thin dentinal bridge layer. Conclusion: At 1 month, Er-Yag laser proved to be useful with Biodentine® for direct pulp capping procedures

Effect of different mechanical surface treatments on flexural strength of repaired denture base / Efecto de diferentes tratamientos superficiales mecánicos sobre la resistencia a la flexión de la base de la dentadura reparada

Aim: To assess the effect of different mechanical surface treatments on flexural strength of repaired denture base. Material and Methods: Sixty bar-shaped specimens of heat-polymerized acrylic resin were fabricated, and divided into six groups (n=10). All specimens, except the positive control group (group PC), were sectioned into halves to create a 1-mm clearance. A negative control group with no surface treatment (group NC) was also considered. Other groups underwent different surface treatments: group Laser; treated with erbium: yttrium-aluminum-garnet (Er:YAG) laser, group APA; airborne-particle abrasion (APA), group APA plus Laser; a combination of laser and APA, and group Bur; bur grinding. After measuring surface roughness (Ra) with a profilometer, all sectioned specimens were repaired by auto-polymerizing acrylic resin, and thermocycled afterward. Three-point bending test was performed by a universal testing machine. Data were statistically analyzed (α=0.05). Results: The mean surface roughness of all experimental groups were significantly higher than that of group NC (p<0.05). The mean flexural strength of all groups was significantly lower than that of group PC (p<0.05). Group B had significantly higher flexural strength than the other surface-treated groups (p<0.05). Group Laser had significantly higher flexural strength than groups APA (p=0.043) and APA plus Laser (p=0.023). No significant difference was found between groups APA and APA plus Laser (p=0.684). Conclusion: All surface treatments increased the surface roughness and flexural strength compared with the untreated group. The highest flexural strength was observed in specimens treated by bur grinding and then laser, however, it was still significantly lower than intact specimens.

Objetivo: Evaluar el efecto de diferentes tratamientos superficiales mecánicos sobre la resistencia a la flexión de la base de la prótesis reparada. Material y Métodos: Se fabricaron sesenta especímenes en forma de barra de resina acrílica termo-polimerizada y se dividieron en seis grupos (n=10). Todas las muestras, excepto el grupo de control positivo (grupo PC), se seccionaron en mitades para crear un espacio libre de 1 mm. También se consideró un grupo de control negativo sin tratamiento superficial (grupo NC). Otros grupos se sometieron a diferentes tratamientos superficiales: grupo Láser; tratados con láser de erbio: itrio-aluminio-granate (Er:YAG), grupo APA; abrasión por partículas en el aire (APA), grupo APA más láser; una combinación de láser y APA, y grupo Bur; molienda de fresas. Después de medir la rugosidad de la superficie (Ra) con un perfilómetro, todas las muestras seccionadas se repararon con resina acrílica de autopolimerización y se sometieron a termociclado. La prueba de flexión de tres puntos se realizó con una máquina de prueba universal. Los datos se analizaron estadísticamente (α=0,05). Resultados: La rugosidad superficial media de todos los grupos experimentales fue significativamente mayor que la del grupo NC (p<0,05). La resistencia media a la flexión de todos los grupos fue significativamente menor que la del grupo PC (p<0,05). El grupo B tenía una resistencia a la flexión significativamente mayor que los otros grupos tratados en la superficie (p<0,05). El grupo Láser tuvo una resistencia a la flexión significativamente mayor que los grupos APA (p=0,043) y APA más Láser (p=0,023). No se encontró diferencia significativa entre los grupos APA y APA más Láser (p=0,684). Conclusión: Todos los tratamientos superficiales aumentan la rugosidad de la superficie y la resistencia a la flexión en comparación con el grupo sin tratar. La resistencia a la flexión más alta se observó en las muestras tratadas con fresado y luego con láser; sin embargo, aún era significativamente más baja que las muestras intactas.

Thulium laser enucleation of prostate versus laparoscopic trans-vesical simple prostatectomy in the treatment of large benign prostatic hyperplasia: head-to-head comparison

ABSTRACT Objectives: To compare thulium laser enucleation of prostate (ThuLEP) versus laparoscopic trans-vesical simple prostatectomy (LSP) in the treatment of benign prostatic hyperplasia (BPH). Materials and Methods: Data of patients who underwent surgery for "large" BPH (>80mL) at three Institutions were collected and analyzed. Two institutions performed ThuLEP only; the third institution performed LSP only. Preoperative (indwelling catheter status, prostate volume (PVol), hemoglobin (Hb), Qmax, post-voiding residual volume (PVR), IPSS, QoL, IIEF-5) and perioperative data (operative time, enucleated adenoma, catheterization time, length of stay, Hb-drop, complications) were compared. Functional (Qmax, PVR, %ΔQmax) and patient-reported outcomes (IPSS, QoL, IIEF-5, %ΔIPSS, %ΔQoL) were compared at last follow-up. Results: 80 and 115 patients underwent LSP and ThuLEP, respectively. At baseline, median PVol was 130 versus 120mL, p <0.001; Qmax 9.6 vs. 7.1mL/s, p=0.005; IPSS 21 versus 25, p <0.001. Groups were comparable in terms of intraoperative complications (1 during LSP vs. 3 during ThuLEP) and transfusions (1 per group). Differences in terms of operative time (156 vs. 92 minutes, p <0.001), Hb-drop (-2.5 vs. −0.9g/dL, p <0.001), catheterization time (5 vs. 2 days, p <0.001) and postoperative complications (13.8% vs. 0, p <0.001) favored ThuLEP. At median follow-up of 40 months after LSP versus 30 after ThuLEP (p <0.001), Qmax improved by 226% vs. 205% (p=0.5), IPSS decreased by 88% versus 85% (p=0.9), QoL decreased by 80% with IIEF-5 remaining almost unmodified for both the approaches. Conclusions: Our analysis showed that LSP and ThuLEP are comparable in relieving from BPO and improving the patient-reported outcomes. Invasiveness of LSP is more significant.

Endoscopic Holmium Laser harvesting of bladder mucosal graft for substitution urethroplasty

ABSTRACT Introduction: Tissue transfer has been used in urethral reconstruction for decades, and several grafts have been described (1, 2). The ideal graft would have optimal tissue characteristics and lead to minimal morbidity at the donor site. Urethroplasty using bladder mucosa was first described by Memmelaar in 1947 (3). The main limitation in using bladder mucosal grafts has been the invasiveness of open harvesting (4). We describe an endoscopic technique using Holmium: YAG laser to harvest bladder mucosal graft for substitution urethroplasty. Methodology: A 33-year-old male with no history of urethral instrumentation, trauma, or infection presented with obstructive lower urinary tract symptoms. On retrograde urethrogram a 6cm bulbar urethral stricture was identified. Several options were discussed, and the patient opted for a one-sided onlay dorsal urethroplasty (5) using a bladder mucosal graft. Equipment used to harvest the graft included an 18.5Fr continuous flow laser endoscope with a Kuntz working element (RZ) and a 60W Holmium Laser (Quanta) with 550μm laser fiber. The procedure was started by making a perineal incision, urethral mobilization and incision of the stricture segment. The laser endoscope was then introduced via the perineum. Settings of 0.5J, 30 Hz, and long pulse were used and a 7 x 2.5cm graft was harvested from the posterior bladder wall. Hemostasis of the harvest site was performed. The bladder mucosal graft was thinned in similar fashion to a buccal mucosal graft and sutured as per previously described techniques. Conclusion: Endoscopic Holmium Laser harvesting of bladder mucosal graft is feasible and may allow this graft to become an alternative to buccal mucosa. Further studies are required to define its role in urethral reconstruction.

Holmium laser ablation of the prostate (HoLAP) with moses technology for the surgical treatment of benign prostatic hyperplasia

ABSTRACT Purpose: The expansion of technology is leading to a paradigm shift in several urological fields (1, 2). In particular, the adoption of lasers within the surgical treatment of patients with benign prostatic hyperplasia (BPH) is considered one of the most relevant innovations (3-5). In this video, we aimed to report our experience with holmium laser for the ablation of the prostate (HoLAP) in patients with obstructive lower urinary tract symptoms (LUTS) due to BPH. Materials and Methods: From 2018 to 2020, 10 patients with obstructive LUTS secondary to BPH were treated at our Institution with HoLAP (120W Holmium laser Lumenis® with Moses® technology). Main inclusion criteria were: 1) International Prostate Symptom Score ≥12; 2) prostate volume ≤65mL, 3) maximal flow rate (Qmax) ≤15ml/s at preoperative non-invasive uroflowmetry. Results: Mean patient age was 65 (range: 59-72) years. Preoperative mean prostate volume was 50 (range: 35-65) mL. Mean operative time was 66 (range: 45-85) minutes with a mean laser time/operative time ratio of 0.51 (range: 0.44-0.60). Voiding symptoms, Qmax and post voiding residual were significantly improved after 3 and 12 months (all p <0.05). No postoperative urinary incontinence was detected. Conclusions: The present findings suggest that HoLAP is a slightly time-spending procedure, thus its use should be limited to prostate volume <70-80mL. However, no postoperative complications were recorded at all. This technique showed to be a safe option in patients with low-intermediate prostate volume, also in patients whose antiaggregant/anticoagulant therapy is maintained.

Experimental nano calcium aluminate/tri calcium silicate root repair: Synthesis, physical and mechanical properties compared to mineral trioxide aggregate and Biodentine / Reparo radicular experimental de nano aluminato de cálcio/silicato de tri cálcio: Síntese, propriedades físicas e mecânicas em comparação com agregado de trióxido mineral e Biodentine

Objective: Endodontic perforation is a challenging mishap that should be repaired with a biocompatible material, Mineral trioxide aggregate (MTA) and Biodentine are the most commonly used repair materials. However, these materials are expensive, (MTA) has prolonged setting time and difficult manipulation. The purpose of this study is to prepare the experimental nano calcium-aluminate/tri-calcium-silicate (CA/C3S) material and comparing its physical properties with biodentine and MTA, to evaluate the experimental material eligibility to compete the commercial repair materials. And to perform part two (animal study) that will evaluate the cytotoxicity, the biocompatibility and the efficacy of (CA/C3S) in furcal perforation repair compared to diode laser. Material and Methods: A mixture of calcium carbonate and aluminum oxide was used to formulate calcium aluminate phase (CA), tri-calcium-Silicate phase (C3S) was formulated by firing of calcium carbonate and quartz. The produced powders were investigated by X-ray diffraction, then (CA) and (C3S) mixed with water.(CA/ C3S) compared with MTA and biodentine for setting-time, micro-hardness, dimensional-stability and solubility. Results: Mean setting time of (CA/C3S) was (32.70±0.75min) which is significantly higher than MTA and Biodentine. The Mean microhardness of (CA/C3S) was (56.50±7.41VHN) which has no statical difference with MTA and Biodentine. Solubility results showed weight increase for (CA/C3S) as following (6.29±3.05)and loss of weight for MTA and Biodentine. The percentage of change in dimensions for(CA/C3S) increased as following (0.64±0.78) while decreased for MTA and Biodentine. Conclusion: The experimental (CA/C3S) material showed good microhardness, dimensional stability and acceptable setting time that could be improved in further work (AU)

Objetivo: A perfuração endodôntica é um percalço desafiador que deve ser reparado com um material biocompatível, Agregado de trióxido mineral (MTA) e Biodentina são os materiais de reparo mais comumente usados. No entanto, esses materiais são caros, (MTA) tem tempo de presa prolongado e difícil manipulação. O objetivo deste estudo é preparar o material experimental de nano aluminato de cálcio/silicato tricálcico (CA/C3S) e comparar suas propriedades físicas com biodentina e MTA, para avaliar a elegibilidade do material experimental para competir com os materiais de reparo comerciais. E realizar a segunda parte (estudo animal) que avaliará a citotoxicidade, a biocompatibilidade e a eficácia do (CA/C3S) no reparo de perfuração de furca em comparação ao laser de diodo.Material e Métodos: Uma mistura de carbonato de cálcio e óxido de alumínio foi usada para formular a fase de aluminato de cálcio (CA), a fase tri-cálcio-silicato (C3S) foi formulada por queima de carbonato de cálcio e quartzo. Os pós produzidos foram investigados por difração de raios X, em seguida (CA) e (C3S) misturados com água. (CA/ C3S) comparados com MTA e biodentina para tempo de presa, microdureza, estabilidade dimensional e solubilidade. Resultados: O tempo médio de presa de (CA/C3S) foi (32,70±0,75min) que é significativamente maior que MTA e Biodentine. A microdureza média de (CA/C3S) foi (56,50±7,41VHN) que não tem diferença estática com MTA e Biodentine. Os resultados de solubilidade mostraram aumento de peso para (CA/C3S) conforme a seguir (6,29±3,05) e perda de peso para MTA e Biodentine. A porcentagem de mudança nas dimensões para (CA/C3S) aumentou como segue (0,64±0,78), enquanto diminuiu para MTA e Biodentine. Conclusão: O material experimental (CA/C3S) apresentou boa microdureza, estabilidade dimensional e aceitável tempo de presa, que pode ser melhorado em trabalhos futuros (AU)

Effect of laser-assisted retrograde cavity preparation on push-out-bond-strength of mineral trioxide aggregate and calcium-enriched-mixture-cement / Efeito de preparo cavitário retrógrado assistido por laser na força de união de cimento de agregado trióxido mineral e cimento enriquecido com cálcio

Objective: This study aimed to determine the push-out-bond-strength(PBS) of mineral trioxide aggregate (BIOMTA+) and calcium-enriched-mixture-cement (CEM) in retrograde cavities prepared using Er: YAG laser and stainless-steel bur. Material and Methods: The root canals of 60 extracted single-rooted human teeth were prepared, filled and their apical portion of 3-mm were resected using a diamond bur and randomly divided into four groups according to technique of retrograde preparation and filling material as follows(n=15): Group1: bur/ BIOMTA+ ,Group2: bur/ CEM, Group3: Er:YAG laser/ BIOMTA+, Group4: Er:YAG laser/ CEM. PBS test were performed to specimens and failure modes were evaluated. The data were statistically analyzed with ANOVA, Post-Hoc Tukey and t tests (p< 0.05). Results: CEM was exhibited higher than bond strength compared to BIOMTA+ in retrograde cavity prepared using laser (p= 0.021) and BIOMTA+ in retrograde cavity prepared using bur was exhibited higher than bond strength compared to in retrograde cavities prepared using laser (p= 0.024). Failure modes were dominantly cohesive in all groups tested and one representative specimen each failure mode was examined in SEM and the general characteristics of the failure modes were confirmed. Conclusion: With in the limitations of the present study, when used CEM, Er: YAG laser-assisted retrograde cavity preparation positively affected the bond strength values compared to BIO MTA+. Considering its optimal adhesion, the calcium-enriched-mixture-cement (CEM) might be a good option as a filling material in retrograde cavities in clinical use. (AU)

Objetivo: O objetivo deste estudo foi determinar a força de união (PBS) de cimento de agregado trióxido mineral (BIO MTA+) e cimento enriquecido com cálcio (CEM) em preparos cavitários retrógrados realizados com: Laser Er-YAG e brocas de aço inoxidável. Material e Métodos: Canais radiculares de 60 dentes unirradiculares extraídos foram preparados, preenchidos e 3 mm de suas porções apicais foram ressecadas usando uma broca diamantada e divididos randomicamente em quatro grupos de acordo com a técnica de preparação retrógrada e o material de preenchimento (n=15): Grupo 1: Broca/BIO MTA+, Grupo 2: Broca/CEM, Grupo 3: Laser Er-YAG/BIO MTA+, Grupo 4: Laser Er-YAG/CEM. O teste de PBS foi realizado para as amostras e os modelos de falha foram avaliados. Os dados foram analisados estatisticamente pelos testes de ANOVA, Post-Hoc Tukey e testes t (p< 0.05). Resultados: CEM apresentou maior força de união que BIO MTA+ em cavidades retrógradas preparadas com laser (p= 0.021) e BIO MTA+ em cavidades retrógradas preparadas com brocas apresentou maior força de união quando comparado à cavidades retrógradas preparadas com laser (p= 0.024). Os modelos de falha foram predominantemente coesos em todos os grupos testados e um espécime representativo de cada modelo de falha foi examinado em MEV e as características gerais dos modelos de falha foram confirmadas. Conclusão: Com as limitações do presente estudo, quando usou-se CEM, o preparo de cavidades retrógradas através de Laser Er-YAG afetou positivamente os valores da força de união quando comparados com BIO MTA+. Considerando sua ótima adesão, o cimento enriquecido com cálcio (CEM) pode ser uma boa opção como um material de preenchimento em cavidades retrógradas no uso clínico.

Influence of diode laser and warm air drying on the shear bond strength of Lithium di-silicate to Dentin. An in-vitro study / Influência do laser de diodo e da secagem com ar quente na resistência ao cisalhamento do Di-silicato de Lítio a dentina. Um estudo in-vitro

Objective: The current study aimed to evaluate the effect of diode laser irradiation (980 nm) and warm air drying (50°C) on shear bond strength between Lithium di-silicate (IPS e.max; Ivoclar) and human dentin using both (Etch & Rinse) adhesive, Adper™ Single Bond 2 (3M ESPE) and (Self-etch) adhesive, Single Bond UniversalTM(3M ESPE) before adhesive polymerization. Material and Methods: 54 sound lower molars were sectioned to obtain flat dentinal surfaces. Specimens were divided into 2 equal groups (n=27): Group 1 (ER) and Group 2 (SE) according to bonding approach. Each subgroup was subdivided according to dentin surface treatment into 3 equal subgroups (n=9): Control (Co), Diode laser irradiation (L) and Warm air drying (W). All specimens were adhesively cemented to IPS e.max® CAD discs using RelyX™ Ultimate Clicker™(3M ESPE) resin cement. Samples were then subjected to pre-loading in a thermodynamic manner. All samples were tested for shear bond strength using computer-controlled material testing machine. Data analysis was performed using two-way (ANOVA) (p< 0.05) followed by pair-wise Tukey's post-hoc tests. Results: In (SE) group, the subgroup (W) had the highest shear bond strength values followed by (Co) subgroup and the least was (L) subgroup with statistically significant difference. As for (ER) group, the subgroup (W) had the highest shear bond strength values followed by (Co) subgroup and the least was (L) subgroup with no statistically significant difference. Conclusion: Warm air drying for (SE) bonding approach increased shear bond strength of Lithium di-silicate to human dentin and can be introduced as a new effective protocol.(AU)

Objetivo: o objetivo do estudo atual é avaliar o efeito da radiação do laser de diodo (980nm) e secagem de ar quente (50°C) na resistência ao cisalhamento entre dissilicati de Lítio (IPS e.max; Ivoclar) e a dentina humana usando ambos modelos de adesivos (condicionamento total) Adper™ Single Bond e (auto-condicionante) Single Bond Universal™ (3M ESPE), Single Bond UniversalTM (3M ESPE) antes da fotopolimerização. Material e Métodos: 54 segundos molares inferiores foram selecionados para obter superfícies dentinárias planas. Os espécimes foram divididos em 2 grupos iguais (n=27): grupo 1 (ER) e grupo 2 (SE) de acordo com protocolo de adesividade. Cada grupo foi subdividido de acordo com o tratamento de superfície dentro de 3 subgrupos iguais (n=9): Controle (co), irradiação com laser de diodo (L) e secagem com ar quente (W). Todos os espécimes foram adesivamente cimentados a discos de IPS emax CAD usando RelyX Ultimate Clicker (3M ESPE) cimento resinoso. As amostras foram então submetidas a pré-carregamento de forma termodinâmica. Todas as amostras foram testadas para resistência a cisalhamento usando máquina de teste de materiais controlados por computador. A análise de dados foi realizada usando ANOVA dois fatores (p<0.05) seguindo por testes de Tukey pareado como test post-hoc. Resultados: No grupo (SE), o subgrupo (W) apresentou maiores valores de resistência ao cisalhamento seguindo o subgrupo (Co) é o menor foi o subgrupo (L) com diferença estatisticamente significativa. Já para o grupo (Er), o subgrupo (W) apresentou os maiores valores de resistência ao cisalhamento seguido do grupo (Co) e o menor foi o subgrupo (L) sem diferença estatisticamente significante. Conclusão: a secagem com ar quente para a abordagem de adesividade (Se) aumentou a resistência ao cisalhamento do dissilicato de lítio à dentina humana e poderia ser introduzido como um novo e eficaz protocolo(AU)

Avaliação clínica de restaurações Classe V em cavidades tratadas com o laser de Er: YAG associado ao uso de sistemas adesivos autocondicionantes / Clinical evaluation of Class V restorations in cavities treated with Er: YAG laser associated with the use of self-etching adhesive systems

O objetivo deste estudo clínico, controlado, randomizado, cego e prospectivo foi de avaliar a efetividade clínica de restaurações em lesões não cariosas (cavidades Classe V) realizadas em superfícies dentais pré-tratadas ou não com laser de Er:YAG e utilizando dois sistemas adesivos autocondicionantes. Este estudo foi realizado com um total de 91 lesões e divididas em 4 grupos (n = 23) :G1(FL): Sem pré-tratamento e utilizando o adesiso FL-Bond II/Shofu; G2 (CF): sem pré-tratamento e utilizando o adesivo Clearfil SE Bond 2/Kuraray Noritake; G3 (Laser + FL): pré-tratamento associado ao uso do FL-Bond II/Shofu e G4 (Laser + CF): pré-tratamento associado ao uso do Clearfil SE Bond 2/Kuraray Noritake Os dentes avaliados foram os pré-molares de ambas as arcadas. A avaliação foi feita imediatamente após o tratamento e ao longo do tempo, em 3, 6 e 12 meses após a finalização da restauração. Para a avaliação da sensibilidade foi considerado a EVA (Escala Visual Analógica) e para a qualidade da restauração o método do USPHS modificado, considerando a avaliação de perda de retenção, integridade marginal, pigmentação marginal, presença de lesão de cárie em margem de restauração, vitalidade pulpar e sensibilidade pós-operatória. Os dados foram registrados em tabelas de frequência, e os escores transformados em postos para a aplicação do teste ANOVA. A significância estatística foi considerada para valores de p<0,05. Para os resultados da avaliação de sensibilidade houve uma diferença estatística significante da sensibilidade ao longo do tempo (p<0,001), sendo que essa diferença se deu a partir da avaliação T1 (48 horas) em todos os grupos. Em relação aos critérios avaliados no USPHS, foram encontrados variações estatísticas em alguns tópicos: Pigmentação marginal - G1 (FL) (p=0,041) e G2 ( Laser + FL) (p=0,009) e Integridade marginal G1(FL)( p=0,036). Os demais grupos e critérios não apresentaram variações estatísticas significantes.Pré-tratamentos com laser Er:YAG podem ser uma alternativa viável em restaurações adesivas do tipo classe V; no entanto, nenhum efeito sinérgico de ambos os tratamentos combinados foi observado.

The objective of this clinical, controlled, randomized, blinded and prospective study was to evaluate the clinical effectiveness of restorations in non-carious lesions (Class V cavities) performed on dental surfaces pre-treated or not with Er:YAG laser and using two adhesive systems self-conditioning. This study was carried out with a total of 91 lesions and divided into 4 groups (n = 23) :G1(FL): No pre-treatment and using the FL-Bond II/Shofu adhesive; G2 (CF): without pre-treatment and using Clearfil SE Bond 2/Kuraray Noritake adhesive; G3 (Laser + FL): pre-treatment associated with the use of FL-Bond II/Shofu and G4 (Laser + CF): pre-treatment associated with the use of Clearfil SE Bond 2/Kuraray Noritake The teeth evaluated were the premolars of both arcades. Assessment was performed immediately after treatment and over time, at 3, 6, and 12 months after completion of the restoration. The VAS (Visual Analogue Scale) was used for the sensitivity assessment and the modified USPHS method for the quality of the restoration, considering the assessment of loss of retention, marginal integrity, marginal pigmentation, presence of caries in the restoration margin. , pulp vitality and postoperative sensitivity. Data were recorded in frequency tables, and the scores were transformed into ranks for the application of the ANOVA test. Statistical significance was considered for values of p<0.05. For the results of the sensitivity evaluation, there was a statistically significant difference in sensitivity over time (p<0.001), and this difference occurred from the T1 evaluation (48 hours) in all groups. Regarding the criteria evaluated at the USPHS, statistical variations were found in some topics: Marginal pigmentation - G1 (FL) (p=0.041) and G2 (Laser + FL) (p=0.009) and Marginal integrity - G1(FL)( p =0.036). The other groups and criteria did not present significant statistical variations. Pretreatments with Er:YAG laser can be a viable alternative in class V adhesive restorations; however, no synergistic effect of both treatments combined was observed.

Alteração refracional após capsulotomia posterior com laser Nd: YAG / Change on refraction after Nd: YAG laser posterior capsulotomy

RESUMO Objetivo: Identificar se há mudança refracional significativa após realização de capsulotomia posterior com laser Nd:YAG em olhos pseudofácicos. Métodos: Estudo retrospectivo com análise de prontuários de pacientes atendidos em um hospital com diagnóstico de opacificação de cápsula posterior do cristalino tratada com capsulotomia posterior com laser Nd:YAG no período de outubro de 2019 a março de 2021. A comparação entre a refração antes e após o procedimento foi realizada calculando-se o equivalente esférico. Também foi avaliada a mudança da acuidade visual, aferida por LogMAR. Resultados: Foram analisados 90 prontuários, totalizando 140 olhos, de pacientes submetidos à capsulotomia posterior com laser Nd:YAG. O equivalente esférico médio pré-procedimento foi de -0,07±0,89D, mínimo de -3,0D e máximo de +2,5D, mediana (intervalo interquartil) de 0,0D (-0,50D a +0,375D). A média pós-procedimento foi de -0,18±0,86D, mínimo de -3,5D e máximo de +2,25D, mediana (intervalo interquartil) de -0,125D (-0,50D a 0,0D). com p<0,0082. Dos 140 olhos, 66 sofreram miopização e 37 hipermetropização. A média de alteração do equivalente esférico geral foi de -0,12±0,51D, mínimo de -2,50D e máximo de +1,25D, mediana (intervalo interquartil) de 0,0D (-0,375D a +0,125D). Ao se comparar a diferença entre o equivalente esférico antes e após o procedimento do grupo de olhos que sofreu miopização (n=66) ou hipermetropização (n=37), separadamente, ambos obtiveram p<0,0001. Ao se compararem todos os olhos que sofreram alguma alteração refracional (n=103), foi encontrado p=0,008. A acuidade visual média pré-procedimento foi de 0,23±0,32, mínimo de 0,0 e máximo de 2,3. Pós-procedimento, a média foi de 0,06±0,13, mínimo de -0,12 e máximo de 0,7, com p<0,0001. Conclusão: A capsulotomia posterior com laser Nd:YAG gerou melhora significativa da acuidade visual nos pacientes do estudo, porém também gerou alteração refracional significativa após o procedimento, tanto para miopização (a mais frequente), quanto para hipermetropização.

ABSTRACT Objective: To identify if there is a significant change on refraction after Nd:YAG laser posterior capsulotomy in pseudophakic eyes. Methods: A retrospective study with analysis of medical records of patients treated at a hospital, with diagnosis of opacification of posterior lens capsule treated with Nd:YAG laser posterior capsulotomy, from October 2019 to March 2021. The comparison of refraction before and after the procedure was performed by calculating the spherical equivalent. Changes in visual acuity (VA), measured by LogMAR, were also evaluated. Results: A total of 90 medical records (140 eyes) of patients submitted to Nd:YAG laser posterior capsulotomy were analysed. The mean pre-procedure spherical equivalent was -0.07±0.89D, minimum of -3.0D and maximum of +2.5D, median (interquartile range) of 0.0D (-0.50D to +0.375D). The post-procedure mean was -0.18±0.86D, minimum of -3.5D and maximum of +2.25D, median (interquartile range) of -0.125D (-0.50D to 0.0D), with p <0.0082. Of the 140 eyes, 66 underwent myopia and 37 hyperopia, the mean change in the general spherical equivalent was -0.12±0.51D, minimum -2.50D and maximum +1.25D, median (interquartile range) of 0.0D (-0.375D to +0.125D). When comparing the difference between the spherical equivalent before and after the procedure of the group of eyes that underwent myopia (n=66) or hyperopia (n=37), separately, both obtained p<0.0001. When comparing all eyes that suffered any change on refraction (n=103), the p value was 0.008. The mean pre-procedure visual acuity was 0.23±0.32, minimum of 0.0 and maximum of 2.3. After the procedure, the mean was 0.06±0.13, minimum of -0.12 and maximum of 0.7, p<0.0001. Conclusion: Nd:YAG laser posterior capsulotomy significantly improved visual acuity of patients in this study; however, it also led to a significant change on refraction after the procedure, both for myopization, which was more frequent, and for hyperopization.

Erbium laser in the debonding of ceramics: a literature review / Laser de érbio na remoção de cerâmicas: uma revisão de literatura

Background: The debonding of crowns and ceramic veneers with laser is already a reality in the clinic. It presents benefits in comparison to traditional removal with the use of a rotating instrument; however, there is still no consolidated protocol and many professionals use it without the necessary scientific basis. Objective: The aim of this work was to perform a literature review on the debonding of indirect ceramic restorations using the Er:YAG and Er,Cr:YSGG lasers to provide clinical professionals and the scientific community a careful analysis, and also to guiding the use of irradiation at laser for such procedures. Methods: Bibliographic searches were performed in the following databases: Pubmed, Web of Science and Google Scholar. According to the inclusion criteria adopted, twenty-seven clinical and in vitro studies were selected in the period from 2007 to 2021. In the present work, the composition of the crowns and facets, as well as the types of cement and the laser irradiation protocols adopted in the selected studies is detailed. Conclusions: It was concluded that the use of erbium lasers for debonding of indirect ceramic restorations proved to be more selective and conservative when compared to removal with a rotary diamond instrument. Furthermore, it was shown to be in more efficient in debonding different types of ceramics. However, there are great variations in the "debonding" protocols, which emphasizes the need for further studies that seek to standardize the irradiation protocols considering the different clinical situations (AU)

Antecedentes: A remoção de coroas e facetas cerâmicas com laser já é uma realidade clínica e apresenta benefícios em relação à remoção tradicional com uso de instrumento rotatório diamantado; entretanto, ainda não existe um protocolo consolidado e muitos profissionais o utilizam sem o embasamento científico necessário. Objetivos: O objetivo deste trabalho foi realizar uma revisão da literatura sobre a remoção de restaurações cerâmicas indiretas utilizando os lasers Er:YAG e Er,Cr:YSGG para fornecer uma análise cuidadosa aos profissionais clínicos e à comunidade científica, além de orientar o uso da irradiação a laser para tal aplicação. Métodos: As buscas bibliográficas foram realizadas, nas seguintes bases de dados: Pubmed, Web of Science e Google Scholar. De acordo com os critérios de inclusão adotados, foram selecionados vinte e sete estudos clínicos e in vitro no período de 2007 a 2021. No presente trabalho, a composição das coroas e facetas, bem como os tipos de cimento e os protocolos de irradiação laser adotados nos estudos selecionados foram detalhados. Conclusão: Concluiu-se que o uso dos lasers de érbio para remoção de restaurações cerâmicas indiretas mostrou-se mais seletivo e conservador quando comparado à remoção com instrumento rotatório diamantado, além de ser eficiente na remoção de diferentes tipos de cerâmicas. No entanto, existem grandes variações nos protocolos de "debonding", o que enfatiza a necessidade de novos estudos que busquem uma padronização dos protocolos de irradiação considerando as diferentes situações clínicas.(AU)

Comparación de la costo-efectividad de la nefrolitotomía percutánea y de la nefrolitotomía retrógrada flexible con láser de holmio en pacientes con litiasis renal de 20 a 30 mm en Colombia / Comparison of the Cost-effectiveness of Percutaneous Nephrolithotomy and Flexible Retrograde Holmium Laser Nephrolithotomy in Patients with Kidney Stones of 20 to 30 mm in Colombia

Introducción y Objetivo Con el advenimiento de nuevas tecnologías, vienen controversias respecto al espectro de sus aplicaciones. El costo derivado de estas tecnologías juega un papel muy importante en el momento de la toma de decisiones terapéuticas. Es por esto que consideramos relevante estimar la costo-efectividad de la nefrolitotomía percutánea comparada con la nefrolitotomía retrógrada flexible con láser de holmio en pacientes con litiasis renal de 20 mm a 30 mm en Colombia. Materiales y Métodos Por medio de la construcción de un modelo de árbol de decisión usando el programa Treeage (TreeAge Software, LLC, Williamstown, MA, EE.UU.), se realizó una comparación entre la nefrolitotomía percutánea y la nefrolitotomía retrógrada flexible con láser de holmio en pacientes con litiasis renal de 20 mm a 30 mm. La perspectiva fue la del tercer pagador, y se incluyeron los costos directos. Las cifras fueron expresadas en pesos colombianos de 2018. La mejoría clínica, definida como el paciente libre de cálculos, fue la unidad de resultado. Se hizo una extracción de datos de efectividad y seguridad por medio de una revisión sistemática de la literatura. La razón de costo-efectividad incremental fue calculada. Resultados El modelo final indica que la nefrolitotomía percutánea puede ser considerada como la alternativa más costo-efectiva. Los hallazgos fueron sensibles a la probabilidad de mejoría clínica de la nefrolitotomía percutánea. Conclusión Teniendo en cuenta las variables económicas, los supuestos del modelo y desde la perspectiva del tercer pagador, la nefrolitotomía percutánea para el tratamiento de pacientes con cálculos renales de 20 mm a 30 mm es costo-efectiva en nuestro país. Estos hallazgos fueron sensibles a los costos y a la efectividad de los procedimientos quirúrgicos.

Introduction and Objective The advent of new technologies leads to controversies regarding the spectrum of their applications and their cost. The cost of these technologies plays a very important role when making therapeutic decisions. Therefore, we consider it relevant to estimate the cost-effectiveness of percutaneous nephrolithotomy compared with flexible retrograde holmium laser nephrolithotomy in patients with kidney stones of 20 mm to 30 mm in Colombia. Materials and Methods Through the development of a decision tree model using the Treeage (TreeAge Software, LLC, Williamstown, MA, US) software, we compared percutaneous nephrolithotomy with flexible holmium laser retrograde nephrolithotomy in patients with kidney stones of 20 mm to 30 mm. The perspective was that of the third payer, and all direct costs were included. The figures were expressed in terms of 2018 Colombian pesos. Clinical improvement, which was defined as a stone-free patient, was the outcome unit. We extracted data on effectiveness and safety through a systematic review of the literature. The incremental cost-effectiveness ratio was calculated. Results In terms of cost-effectiveness the final model indicates that percutaneous nephrolithotomy may be considered the best alternative. These findings were sensitive to the probability of clinical improvement of the percutaneous nephrolithotomy. Conclusion Taking into account the economic variables, the assumptions of the model, and through the perspective of the third payer, percutaneous nephrolithotomy for the treatment of patients with kidney stones of 20 mm to 30mm is cost-effective in our country. These findings were sensitive to the costs and effectiveness of the surgical procedures.

Síndrome de contracción capsular bilateral / Bilateral capsule contraction syndrome

El síndrome de contracción capsular se describe como una reducción progresiva y acelerada del diámetro de la capsulorrexis y del saco capsular tras la extracción extracapsular del cristalino. Se reporta el caso de una paciente femenina, con antecedentes de miopía elevada, a quien se le realizó cirugía de catarata de ambos ojos sin complicaciones transquirúrgicas, y regresa con síndrome de contracción capsular bilateral al mes de operada. Se comenta la conducta seguida en ambos ojos(AU)

Capsule contraction syndrome is described as progressive, accelerated reduction in capsulorhexis and capsular bag diameter after extracapsular crystalline lens extraction. A case is presented of a female patient with a history of high myopia who underwent cataract surgery of both eyes without any intraoperative complication. One month after surgery the patient presents with bilateral capsule contraction syndrome. Comments are made on the clinical management of each eye(AU)

Lupus eritematoso sistémico / Systemic lupus erythematosus

El lupus eritematoso sistémico es una enfermedad autoinmune, de curso crónico con afectación multisistémica. Las manifestaciones oculares del lupus eritematoso sistémico pueden afectar cualquier estructura del ojo. La formación de catarata y la aparición de la diabetes secundaria asociada con el tratamiento esteroideo prolongado es frecuente en estos pacientes. Se presenta el caso de una paciente femenina de 69 años, con antecedentes de lupus eritematoso sistémico de más de 20 años de evolución, tratada con 5 mg diarios de prednisona oral en dosis de mantenimiento. Refiere, además, diabetes mellitus tipo 2 controlada de más de 10 años de evolución. Asiste a la consulta de Oftalmología por disminución de la visión y se diagnostica catarata en el ojo derecho. Se realiza facoemulsificación con implante de lente intraocular plegable, previa profilaxis para la endoftalmitis. La catarata asociada a la diabetes secundaria en los pacientes con lupus eritematoso sistémico justifica el uso de profilaxis antinflamatoria con esteroides tópicos y sistémicos para asegurar una mínima inflamación posoperatoria y mejorar el pronóstico visual(AU)

Systemic lupus erythematosus is a chronic autoimmune disease of multisystemic involvement. Ocular manifestations of systemic lupus erythematosus may present in any structure of the eye. Cataract formation and the appearance of secondary diabetes associated to prolonged steroid therapy are common in these patients. A case is presented of a female 69-year-old patient with a history of systemic lupus erythematosus of more than 20 years' evolution, treated with 5 mg daily of oral prednisone at maintenance doses. The patient also reports controlled diabetes mellitus type 2 of more than ten years' evolution. Her main concern in attending Ophthalmology consultation is vision reduction. Cataract is diagnosed in her right eye. The treatment indicated is phacoemulsification with foldable intraocular lens implantation following prophylaxis for endophthalmitis. Cataract associated to secondary diabetes in patients with systemic lupus erythematosus justifies the use of anti-inflammatory prophylaxis with topical and systemic steroids to ensure minimum postoperative inflammation and improve visual prognosis(AU)

Retreatment of 6 ceramic restorations in a single session - the application of Er:YAG laser and CAD/CAM technology: an 1 year follow up clinical evaluation / Retratamento de 6 restaurações de cerâmica em uma única sessão ­ Utilizando o Laser ER: YAG e a tecnologia CAD/CAM com Acompanhamento de 1 ano

Background: To present the benefits of high power lasers (Er: YAG and Nd: YAG) over the use of the high speed turbine for the extraction of ceramics restorations, without damaging the surfaces of the teeth; being a relatively easier and faster procedure without the use of anesthetic agents, and the preparation of the ceramic restorations and cementing in the single session; with a follow-up of 1 year. Objective: The benefits of lasers over high-speed turbine mechanical instrumentation for crown removal encompass efficient restoration recovery without damage to tooth surfaces; and a relatively easier and faster procedure without the use of anesthetic agents. Methods: The Er: YAG laser (no contact; 3.2-4.0 W, 20 Hz) was used to extract the porcelain prosthesis, followed by a gingivectomy with the Nd: YAG laser on tooth 12 to improve the gingival contour. The dental surfaces where the ceramic prosthesis will be cemented were scanned. Then, CAD / CAM technology was used to make the ceramic veneers that were cemented in the same session. Results: The efficacy the Er:YAG laser energy was observed by the decreased of the time to remove all-ceramic materials through ablation of bonding cements, reducing working time by 75% compared to a high-speed turbine. Conclusions: An Er: YAG laser can safely remove lithium disilicate crowns with the settings used in this study. Laser-assisted removal of all ceramic PDFs is a promising treatment protocol. The use of the Nd: YAG (2.0 W power, short 20Hz, 320 µm optical fiber, in contact) laser allowed gingivoplasty to be performed, automatically cauterizing avoiding post-operative bleeding, and facilitating the preparation of ceramic restorations the same day. The use of high-power lasers and the use of accompanying CAD / CAM technology allowed this clinical case to be completed in a single visit without the use of temporary restorations, achieving absolute patient satisfaction. (AU)

Antecedentes: Apresentar os benefícios dos lasers de alta potência (Er: YAG e Nd:YAG) sobre o uso da turbina de alta velocidade para a remoção de restaurações cerâmicas, sem danificar as superfícies dos dentes; sendo um procedimento relativamente mais fácil e rápido evitando o uso de agentes anestésicos, conseguindo fazer o preparo das restaurações de cerâmica e cimentação em uma única sessão; com seguimento de 1 ano. Objetivo: Os benefícios dos lasers sobre a instrumentação mecânica com turbina de alta velocidade para a remoção da coroa abrangem a recuperação eficiente da restauração sem danos às superfícies dos dentes; e um procedimento relativamente mais fácil e rápido sem o uso de agentes anestésicos. Métodos: O laser Er: YAG (sem contato; 3,2-4,0 W, 20 Hz) foi utilizado para remover a prótese de porcelana, seguido de gengivectomia com o laser Nd: YAG no dente 12 para melhorar o contorno gengival. As superfícies dentais onde a prótese de cerâmica será cimentada foram escaneadas. Em seguida, a tecnologia CAD / CAM foi utilizada para confeccionar as facetas de cerâmicas que foram cimentadas na mesma sessão. Resultados: A eficácia da energia do laser Er: YAG foi observada pela diminuição do tempo na remoção dos materiais cerâmicos por meio da ablação dos cimentos de ligação, reduzindo o tempo de trabalho em 75% em relação a uma turbina de alta velocidade. Conclusão: Um laser Er: YAG pode remover com segurança as coroas de dissilicato de lítio com as configurações usadas neste estudo. A remoção assistida por laser de todos os PDFs de cerâmica é um protocolo de tratamento promissor. O uso do laser Nd: YAG (2,0 W potência, curta 20Hz, 320 µm fibra ótica, em contato) permitiu a realização da gengivoplastia, cauterizando automaticamente evitando sangramento pós-operatório e facilitando o preparo das restaurações cerâmicas no mesmo dia. O uso de lasers de alta potência e o uso da tecnologia CAD / CAM que o acompanha permitiram que este caso clínico fosse concluído em uma única visita, sem o uso de restaurações temporárias, alcançando a satisfação absoluta do paciente (AU)

Randomized comparative study in the treatment of oral leucoplakia with laser and conventional surgery / Estudo comparativo randomizado no tratamento da leucoplasia oral com laser e cirurgia convencional

Objective: High-energy lasers are used as an alternative to surgical treatment of potentially malignant disorders in the oral cavity. The present article aims to make a prospective randomised comparative clinical assessment of the effect of laser surgery and conventional surgery in the treatment of oral leukoplakia (OL). Material and methods: In the study were included 89 patients with histologically confirmed oral leukoplakia lesions. Laser excision of the lesions using Er YAG laser was performed in 36 of the patients, while standard surgical excision was used in 53 of the cases. Following clinical assessment comparing the two treatment methods was conducted based on: pain, wound healing, infection and recurrence of the lesions. Results: A statistically significant difference between two groups according pain in the postoperative period was found. Patients treated with laser ablation experienced far less pain than those treated with surgical excision. The healing time was significantly faster in the group treated with Er YAG laser, and regarding the occurrence of postoperative infections, the results of the two methods did not differ significantly. Recurrence was observed earlier in the group treated with laser ablation, but the levels align over a longer period of time. Conclusion: Er YAG laser ablation is a contemporary method for the treatment of oral leukoplakia without dysplasia, providing similar success, compared to conventional surgical excision, with less postoperative discomfort for the patients. (AU)

Objetivo: Os lasers de alta potência são utilizados como alternativa ao tratamento cirúrgico de doenças potencialmente malignas da cavidade oral. O presente artigo tem como objetivo fazer uma avaliação clínica prospectiva e randomizada comparativa do efeito da cirurgia a laser e da cirurgia convencional no tratamento da leucoplasia oral (LO). Material e Métodos: No estudo foram incluídos 89 pacientes com lesões de leucoplasia oral confirmadas histologicamente. A excisão das lesões com laser Er YAG foi realizada em 36 dos pacientes, enquanto a excisão cirúrgica padrão foi utilizada em 53 dos casos. A avaliação clínica seguinte comparando os dois métodos de tratamento foi realizada com base em: dor, cicatrização da ferida, infecção e recorrência das lesões. Resultados: Foi encontrada diferença estatisticamente significante entre os dois grupos de acordo com a dor no pós-operatório. Os pacientes tratados com ablação a laser experimentaram muito menos dor do que aqueles tratados com excisão cirúrgica. O tempo de cicatrização foi significativamente mais rápido no grupo tratado com laser Er YAG e, em relação à ocorrência de infecções pós-operatórias, os resultados dos dois métodos não diferiram significativamente. A recorrência foi observada mais cedo no grupo tratado com ablação a laser, mas os níveis se alinham por um longo período de tempo. Conclusão: A ablação a laser Er YAG é um método contemporâneo para o tratamento da leucoplasia oral sem displasia, proporcionando sucesso semelhante ao da excisão cirúrgica convencional, com menor desconforto pós-operatório para os pacientes. (AU)